China Agricultural Machinery Spare Parts for Cultivator agricultural equipment parts

Product Description

Agricultural machinery spare parts for cultivator

Product Description

 

Model IDC-16 IDC-18 IDC-22 IDC-24 IDC-28 IDC-30 IDC-35
Diesel engine 16HP 18HP 22HP 24HP 28HP 30HP 35HP
Rotary tillage width(cm) 90-100 90-100 90-120 90-120 90-120 90-120 90-120
Ditching width(cm) 25-30 25-30 25-30 25-30 25-30 25-30 25-30
Weeding width(cm) 90-100 90-100 90-100 90-100 90-100 90-100 90-100
Backfill width(cm) 100 100 100 100 100 100 100
Bulldozing width(cm) 90 90 90 90 90 100 100
Travel gear 3+1 3+1 3+1 3+1 3+1 3+1 3+1
Rotary tillage efficiency 1300m²/h 1800m²/h 1800m²/h 2200m²/h 2200m²/h 2400m²/h 2600m2/h
Weight 530kg 580kg 630kg 680kg 730kg 750kg 800kg
Dimension(cm) 230*90*80 245*90*85 250*90*90 250*90*90 260*90*100 260*100*100 270*100*100
Scope of application Mountains,hills, greenhouses,nurseries, orchards,flower field,s and medium and small plots
Main function Bulldozing, rotary tillage, trenching, backfilling, weeding
Advantages Turn around in place, hydraulic lifting, manned, strong climbing ability, and trafficability

A crawler cultivator is a kind of easy-to-use and widely-used agricultural machinery. Compared to tractors, cultivators are smaller and less expensive. Powered by a small diesel engine or gasoline engine, a micro cultivator has the characteristics of lightweight, small volume, and simple structure. 3 + 3 walking gearbox, 230mm international engineering rubber track, Only 1 main machine is needed to realize the functions of rotary plowing, furrowing, weeding, backfilling, ridge, bulldozer, and transportation platform by changing different attachments, greatly improving the use of the field machine Rate, if farmers want to complete a variety of operations, they do not need to buy new machines, so their cost input has been reduced.

Detailed Photos

Main features:
1. Five main functions:

Rotary tillage, weeding, backfilling, trenching, and ridge formation.

2. The machine has a small volume, low center of gravity, can be turned on the spot, 4 forward gears, and 1 reverse gear.

3. Adopt 16,18,22,24,28,30,and 35 horsepower brand engines, with strong power.

4. The functions of bulldozing, beating medicine, plowing, and returning grass to the field can be customized according to the actual situation.

5. The operating depth and width are 2 to 3 times that of ordinary hand-held micro tillage machines, and the use efficiency is greatly improved.

Applicability: Suitable for all kinds of mountains, hills, plains, dry fields, greenhouses, orchards, and narrow operations, worry. Suitable for all kinds of soil: frozen soil, hard soil, clay, black land, mountain, and soft soil can be used. Tracked trenching fertilizer machine can achieve large-scale machinery can not enter the orchard, small plots of land, greenhouses, tea gardens, hills, mountains Work on different terrains and soils.

1. Single-cylinder water-cooled engine with reliable quality, abundant power and convenient maintenance.
2. Large capacity battery, easier to start in winter.
3. Strong grip, more traction and less damage to the ground. The rubber track contains steel plate, which has strong trafficability and durability.

The fuselage is thick, compact, and crawler-type, allowing for in-situ steering. The knives are thickened with 75 thick steel forging, very wear-resistant and durable, and work efficiently.
(1) High-efficiency fertilization, organic fertilizer powder fertilizer can be adjusted to the minimum half a catty per meter of fertilization
(2) The speed of ditching is adjustable, and the walking speed during work can be controlled at 350 meters per hour and the fastest hour is 3000 meters per hour.

(3) Gear link transmission, strong power
 

Packaging & Shipping

Exporting package

1 unit was packed into an iron frame and then packed with 5 layers of corrugated carton. 4 strips reinforced the carton. the fix package guaranteed the machines were not damaged during transportation

Company Profile

In 2000, “Ideal machinery” started a small workshop in HangZhou city, assembling rebar cutting machines and bending machines. through 20 years of development and relying on word-of-mouth advertising, our product involved kinds of the light construction machine. In order to push our machines into the overseas market, the Brand “Ideal machinery” is established in 2015 and started export trading. until now, nearly 10,000 sets of our machines are servicing overseas construction sites now.
 

FAQ

Q1. What can we do if there are problems with the products?
A: Our engineers will analyze the problem for you and find the best solution. If problems happened within the guaranteed time, we can replace the components for you free of charge. We have dealers in some countries, for some technical problems which you can not solve by yourself.

Q2. What is the delivery time for your products?
A: Once we promise the delivery time, we will try our best to fulfill it. Special procedures such as emergency inventory will be used to maintain your uninterrupted supply of the products.

Q3. Is there any guarantee for your products?
A: Most of our products have 1 year guarantee(for the main parts).

Q4. How can you control your product quality?
A: Quality is always considered the most important part of our manufacturing process. All of our products come under a strict quality control system from raw material inspection, component inspecting,semi-finished product inspecting, performance test of finished products, to random inspection before delivery

After-sales Service: Online Support/Free Accessories
Type: Rotary Tiller
Application Field: Agriculture, Livestock, Aquaculture, Fisheries, Forestry
Farming Policy: Dry Cultivating Machinery
Power Source: Diesel
Operation: Arable Machinery, Fixed Operation

###

Samples:
US$ 3299/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model IDC-16 IDC-18 IDC-22 IDC-24 IDC-28 IDC-30 IDC-35
Diesel engine 16HP 18HP 22HP 24HP 28HP 30HP 35HP
Rotary tillage width(cm) 90-100 90-100 90-120 90-120 90-120 90-120 90-120
Ditching width(cm) 25-30 25-30 25-30 25-30 25-30 25-30 25-30
Weeding width(cm) 90-100 90-100 90-100 90-100 90-100 90-100 90-100
Backfill width(cm) 100 100 100 100 100 100 100
Bulldozing width(cm) 90 90 90 90 90 100 100
Travel gear 3+1 3+1 3+1 3+1 3+1 3+1 3+1
Rotary tillage efficiency 1300m²/h 1800m²/h 1800m²/h 2200m²/h 2200m²/h 2400m²/h 2600m2/h
Weight 530kg 580kg 630kg 680kg 730kg 750kg 800kg
Dimension(cm) 230*90*80 245*90*85 250*90*90 250*90*90 260*90*100 260*100*100 270*100*100
Scope of application Mountains,hills, greenhouses,nurseries, orchards,flower field,s and medium and small plots
Main function Bulldozing, rotary tillage, trenching, backfilling, weeding
Advantages Turn around in place, hydraulic lifting, manned, strong climbing ability, and trafficability
After-sales Service: Online Support/Free Accessories
Type: Rotary Tiller
Application Field: Agriculture, Livestock, Aquaculture, Fisheries, Forestry
Farming Policy: Dry Cultivating Machinery
Power Source: Diesel
Operation: Arable Machinery, Fixed Operation

###

Samples:
US$ 3299/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model IDC-16 IDC-18 IDC-22 IDC-24 IDC-28 IDC-30 IDC-35
Diesel engine 16HP 18HP 22HP 24HP 28HP 30HP 35HP
Rotary tillage width(cm) 90-100 90-100 90-120 90-120 90-120 90-120 90-120
Ditching width(cm) 25-30 25-30 25-30 25-30 25-30 25-30 25-30
Weeding width(cm) 90-100 90-100 90-100 90-100 90-100 90-100 90-100
Backfill width(cm) 100 100 100 100 100 100 100
Bulldozing width(cm) 90 90 90 90 90 100 100
Travel gear 3+1 3+1 3+1 3+1 3+1 3+1 3+1
Rotary tillage efficiency 1300m²/h 1800m²/h 1800m²/h 2200m²/h 2200m²/h 2400m²/h 2600m2/h
Weight 530kg 580kg 630kg 680kg 730kg 750kg 800kg
Dimension(cm) 230*90*80 245*90*85 250*90*90 250*90*90 260*90*100 260*100*100 270*100*100
Scope of application Mountains,hills, greenhouses,nurseries, orchards,flower field,s and medium and small plots
Main function Bulldozing, rotary tillage, trenching, backfilling, weeding
Advantages Turn around in place, hydraulic lifting, manned, strong climbing ability, and trafficability

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China Agricultural Machinery Spare Parts for Cultivator     agricultural equipment partsChina Agricultural Machinery Spare Parts for Cultivator     agricultural equipment parts
editor by czh 2022-11-24